Cold Rolled Coils / Sheets

Grades : 

EN 1.4307 / AISI 304 L

EN 1.4404 / AISI 316 L

EN 1.4016 / AISI 430

Surface Finish : 2B , BA 

Width : 1000mm/1250mm/1500mm

Sheet Format : 1000x 2000mm , 1250 x 2500mm , 1500 x 3000mm

Thickness : 0.4mm - 5mm

Standard:

EN10088-2, EN10028-7, ASTM A240/A240M, ASTM A480/A480M, ASME SA 240/SA240M,ASME SA 480 / SA 480M

Other Certifications * :

IK Test acc. to EN ISO 3651-2 / ASTM A262 Practice E

NACE MR0175/ISO 15156

PED 2014/68/EU , AD2000- W2 

* Depending upon individual requirements 

Hot Rolled Coils / Sheets

Grades : 

EN 1.4307 / AISI 304 L

EN 1.4404 / AISI 316 L

EN 1.4016 / AISI 430

Surface Finish : 1D/ No1

Width : 1000mm/1250mm/1500mm

Sheet Format : 1000x 2000mm , 1250 x 2500mm , 1500 x 3000mm

Thickness : 2 mm - 10mm

Standard:

EN10088-2, EN10028-7, ASTM A240/A240M, ASTM A480/A480M, ASME SA 240/SA240M,ASME SA 480 / SA 480M

Other Certifications *:

IK Test acc. to EN ISO 3651-2 / ASTM A262 Practice E

NACE MR0175/ISO 15156

PED 2014/68/EU , AD2000- W2

* Depending upon individual requirements  

Quarto Plates

Grades : 

EN 1.4307 / AISI 304 L

EN 1.4404 / AISI 316 L

Surface Finish : 1D / No1

Width : 1000mm/1250mm/1500mm/2000mm

Length : upto 6000 mm

Thickness : 12 mm - 50mm

Standard:

EN10088-2, EN10028-7, ASTM A240/A240M, ASTM A480/A480M, ASME SA 240/SA240M,ASME SA 480 / SA 480M

Other Certifications *:

IK Test acc. to EN ISO 3651-2 / ASTM A262 Practice E

NACE MR0175/ISO 15156

PED 2014/68/EU , AD2000- W2

* Depending upon individual requirements  

Long Products

Grades : 

EN 1.4307 / AISI 304 L

EN 1.4404 / AISI 316 L

EN 1.4305 / AISI 303

​

Bright Round Bars:

Diameter : 3mm - 260mm

Tolerance : H9 , H10, H11, K12, K13, EN10060

Supply conditions: Hot Rolled/ Cold drawn/Centreless ground/smooth turned/Rough peeled/  Peeled and Polished/ Chamfered  

​

Bright Hexagonal Bars:

Size Range : 11mm - 70mm

Tolerance : H11, EN10059

Supply conditions: Hot Rolled/ Cold drawn/Polished

​

Bright Square Bars:

Size Range : 6mm - 60mm

Tolerance : H11, EN10059

Supply conditions: Hot Rolled/ Cold drawn/Polished

​

Angle Bars ​:

Size Range : 19x19x3mm upto 100x100x12mm

Tolerance : EN 10056 / ASTM A484

Supply condition : Hot rolled annealed and pickled

​

Flat Bars ​:

Size Range : 20x3mm upto 100x25mm

Tolerance : EN 10058 / ASTM A484

Supply conditions: Hot rolled annealed and pickled

​

Channels:

Size Range :       50x25 x  5mm/6mm 

                            75x40 x  5mm/6mm

                            100x50 x  5mm/6mm

                            150x75 x  5mm/6mm

Tolerance : EN 10279 / ASTM A484

Supply conditions: Hot rolled annealed and pickled